model 150 – basic

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges.Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – 5wl

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TBGE-5WL

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TBGE

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TCAR – 5WL

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

Model 150 – TCAR

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TMAN-5Wl

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TMAN

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TMAP-5WL

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TMAP

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TMOC-5WL

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TMOC

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TNAT-5WL

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TNAT

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TTEK-5WL

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TTEK

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TWAL-5WL

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF

model 150 – TWAL

DESCRIPTION AS SHOWN

  • Wall Materials:

    • Base: 16 ga. Stainless steel #4 brushed finish that allows cab
      venting
    • Level A / Panels: 1/2″ FRMDF faced with Wilsonart laminate
    • Level B / Handrail Panels: 1/2″ FRMDF faced with 20 ga. Stainless
      steel #4 brushed finish o Levels C,D & E / Panels: 1/2″ FRMDF
      faced with Wilsonart laminate
    • Frieze: 20 ga. Stainless steel #4 brushed finish that allows cab
      venting.
    • Notes: All panels faced with customer material selection. All panel
      edges to be black. Reveals between panels will be 1/8” wide and
      black.
  • Corner and Front Reveals: Recessed stainless steel #4
    brushed finish
  • Handrail: 2’’ Flat bar stainless steel #4 brushed
    handrail with returned ends.
  • QTY: (1) per car mounted on the rear wall
  • Ceiling: (6) section stainless steel #4 brushed
    downlight ceiling with 1/8” black reveals and edges. Ceiling to have
    emergency access.
  • Lighting: Man-D-Tec 3000K LED (6) Solobeam dimmable
    system. Emergency lighting is included.

Download PDF